The Essentials of Repairs – The Basics

Camden Plumbing: When to Replace Water Heaters When it comes to your water heater problems, regular maintenance can help in prolonging the lifespan of your heater and leaking or not heating issues can be handled through repair instead of replacement. Allow us to share some troubleshooting tips to have a long-lasting water heater because as simple as replacing a heating element or pressure-relief valve can help resolve water heater problems. There are simple water heater repairs that can be done DIY but if you are not comfortable working with your water heater, you can always call a professional like Camden Plumbing Consultant. According to water heater manufacturing companies, the average life expectancy of a water heater is eight to twelve years, and it varies depending on the design, location, installation quality, water quality, and maintenance schedule. Camden Plumbing Consultants highly recommend replacement of water heater if it is working erratically, more than ten years old, with leaks around the base of the tank, or if it suddenly stops working. The most common problem connected with a water heater is that the water is not as hot as you expected or you want it to be, which is usually caused by a defective heating element, or a faulty thermostat. It is essential to make sure that your electric water heater is maintained properly, ensuring that the power is connected, resetting the thermostat as needed, flushing the heater to eliminate sediments from the tank, replacing thermostat and heating element, and raising thermostat temperature. When managing a gas water heater, you need to remove sediment by flushing, replace the Thermo coupler and clean the burner, ensure that the pilot is lit and the gas is connected, insulate hot water pipes, and raise the temperature setting on the thermostat. For sizzling or hissing noises, it might be caused by collected sediment in the tank, so you need to drain the tank until the water clears. Removal and soaking of elements in a pan filled with vinegar should be done for up to an hour, and collected scale are scraped off. You have to replace leaking pressure-relieve valve as needed. Replacement of water fittings should be done if tightening them does not work. It is essential to drain your water heater at least twice a year to remove sediments that cause corrosion and to increase efficiency. You can check the pressure-relief valve by lifting the handle of the valve and letting it snap back, and it should release a burst of water, otherwise new valve must be installed. If you will choose to replace your water heater, the important features you need to check are the gallon capacity, recovery rate, dimensions, and energy efficiency ratings. If you need help with water heater replacement, feel free to check Camden Plumbing Consultant now on their website.If You Think You Understand Services, Then Read This

Getting Down To Basics with Plumbing